Rock Pulverizer Processing Procedure 2014-09-29 14:28
The process procedure of rock pulverizer, pulverizer machine
1. When rock pulverizer working, the host and the spindle drive motor through reducer rotating turntable, turntable edge of the roll pin driven dozens of rolling mill rolls in the grinding ring raceway.
2. Bulk material by hammer crusher into small particles from the elevator into the storage bin, and then through vibrating feeders and inclined feed tube evenly to the upper part of the material on the turntable bulk trays.
3. Bulk material under the effect of centrifugal force to the peripheral edge, and falls into the grinding ring raceway of the inner ring is the impact of the roller, roller rolling, grinding, after processing into a powder the three ring road, the action of high pressure air to the outside air by suction sucked into the machine, and the material crushed powder selected band.
4. The separator rotating impeller crude materials fell regrinding, to meet the requirements of powder into the air into the cyclone powder collector by the lower part of the discharge valve discharge is finished, and the air with a small amount of fine dust is through pulse dust discharged after purification through the fan and silencer.
If you have any question of rock pulverizer machine, please feel free to contact me. Your satisfaction is our final purpose.
Contact person: Alice Tao
Hotline: 0086-21-20236178
